Electrotor-MicroLite ~ Power Train - Motor

Overview:

Notes: To be moved to lower level page.

What an exciting project, thank you for your interest in Hacker Brushless Motors. We absolutely have a system for that plane. It’s going to require an A200 with the Hacker MasterSpin 300. Your going to need to run 14S and a 30X14-32X12 Mejzlik prop.

The A200 specs are as follows:

Max Watts 15,000
Continuous Amps 185A
Max Bursts 300A
Idle current 5.1A
Resistance .0105
RPM/V 151
Weight 5.7lbs
Diameter 109mm

The only issue at the moment is the MasterSpin 300. Hacker and Jeti are working very hard to finish the production of this esc. and work out some of the small bugs. So at this point they aren’t availa bl e. The system (motor and esc) will cost $1649.00 and I hope to have them available for shipping by April.

Best Regards,
Kyna Veatch
Office Manager
Aero-Model/Hacker Brushless USA

Motortypen:

990.40

990.60

990.80

Zellenzahl: [~ Cell number]

Bis [~ until] 120V

bis 120V

bis 120V

Drehzahl: (U/Volt) [~ Speed]

76

68

57

Max. Leistung: [~ Performance]

15 KW

20 KW

30 KW

Polzahl: [~ Poles]

14

14

14

Stecker:[ ~ Plugs]

-

-

-

Durchmesser: [~ Diameter]

120 mm

12 mm

12 mm

Länge: [~ Length]

120 mm

140 mm

160 mm

Well. durchmes.:

16 mm

16 mm

16 mm

Wellenlänge: [~ Wavelength]

Wählbar [~ Selectable]

wählbar

wählbar

Gesamtgewicht: [~ Total]

ca. 4,9 Kg.

ca. 5,5 Kg.

ca. 7,5 Kg.

Daten:

link..

link..

link..

Preis: [~ Price]

-

2999 €

3699 €

Preis m.L. Umbau [~ Conversion]

-

3399 €

3999 €

The following are RC motors that are being considered for a 1/5 scale Electrotor-SloMo:

KV as we use it refers to the rpm constant of a motor - it is the number of revolutions per minute that the motor will turn when 1V (one Volt) is applied with no load attached to the motor. In summary, we call it revs per volt - but do not think you will obtain those revs when you attach a propeller; obviously the revs will be reduced because of the load.

I have seen this aspect of a motor referred to as KV and Kv and kv - just be sure not confuse it with kV which stands for a kilo-volt.

What does the KV tell us? Well it is related to the power out from a motor, or more usefully the torque level of a motor. It is determined by the number of winds on the armature (or turns as we sometimes call it) and the strength of the magnets - you see, there are so many variables with electric motors. So KV allows us to get a handle on the torque we can expect from a particular motor.

In summary, a low KV motor has more winds of thinner wire - it will carry more volts at less amps, produce higher torque and swing a bigger prop.
___________________________________________

Plettenburg 30: Ref.

KV = 128 rpm/V

1350grams/3-lbs.

50Volts and 220Amps

about 15H.P.

2,000RRPM / 128 = 15.62 V

___________________________________________

___________________________________________

  • Scorpion S-5535 160Kv 859g: Looks like inrunner

Stator Diameter: 55mm (2.165 in)
Stator Thickness: 35mm (1.378 in)
No. of Stator Arms: 18
No. of Magnet Poles: 20
Motor Wind: 12 Turn Delta
Motor Wire: 26-Strand 0.25mm
Motor Kv: 160KV RPM / Volt
No-Load Current (Io/10V): 1.18 Amps
Motor Resistance (Rm): 0.032 Ohms
Max Continuous Current: 85 Amps
Max Continuous Power: 3600 Watts
Weight: 858.9 Grams (29.04 oz)
Outside Diameter: 65.4 mm (2.575 in)
Shaft Diameter: 7.98 mm (0.314 in)
Body Length: 79.25 mm (3.120 in)
Overall Shaft Length; 127.25 mm (5.009 in

2,000RRPM / 160 = 12.5 V

http://www.mamut.net/controls/shop/shops/3/default.asp?wwwalias=hab_ab&gid=29&subgid=509

Posted Dec 23, 2008. http://www.rcgroups.com/forums/showt...0#post11193061

___________________________________________

  • TR 80-85-B 170Kv Brushless Outrunner:

Model: HXT80-85-B
Input Voltage : max. 48V
Kv: 170 rpm/V
Weight: 1230g 2.71 lbs
Shaft: 10mm
Voltage Range: 20-48v
Non Load Current: 2.6A
Stator Size: 77x80mm
Power: 6000W
Turns: 8
Resistance: 37ohm
Idle Current: 2.6A
2,000RRPM / 170 = 11.76 V

http://www.unitedhobbies.com/UNITEDHOBBIES/store/uh_viewItem.asp?idProduct=5141

___________________________________________

  • KD 63-20L Brushless Outrunner:

Specifications

RPM / V (Kv)

Battery

Operating Current (Amps)

Peak Amps (15sec)

Prop

 

KA63-24L

193

10 Lipo

15-38

55

23¡Ñ11

2,000RRPM / 193 = 10.36 V

KA63-20L

235

10 Lipo

23-57

69

22¡Ñ12

 

KA63-18L

259

10 Lipo

25-60

72

19¡Ñ12

 

Weight: 650g, 1.43 lbs

http://www.unitedhobbies.com/UNITEDHOBBIES/store/uh_viewItem.asp?idProduct=2129

___________________________________________

  • HXT 63-74 200kv Brushless Outrunner:

Model: HXT63-74
Input Voltage : 10~36V (3~8S Li-po)
Kv : 200 rpm/V within 10%
Dimentions : 63mm X 92mm
Shaft diameter : 10mm
Weight : 900g, 1.98 lbs
Recommended model weight : 6,000~10,000g
Stator Dimentions: 52x40mm
2,000RRPM / 200 = 10.0 V

http://www.unitedhobbies.com/UNITEDHOBBIES/store/uh_viewItem.asp?idProduct=3890

___________________________________________

  • TGY AerodriveXp SK Series 63-64:

Model: SK63-64 230
Kv: 230rpm/v
Turns: 9
Resistance: 40m-Ohm
Idle Current: 1.7A

Shaft: 10mm
Weight: 690g
Rated Power: 3150W
ESC: 100A (HV)

Cell count: 8-10S

http://www.unitedhobbies.com/UNITEDHOBBIES/store/uh_viewItem.asp?idProduct=7710&Product_Name=TGY_AerodriveXp_SK_Series_63-64_230Kv_/_3150W

___________________________________________

  • KD 63-18L Brushless Outrunner:

KA63-18L
Constant: 259Kv
Battery: 10Cell Lipo
Operating Current: 25-60A
Peak Current: 72A(15sec)
Suggested Prop Size: 19x12

KA63-18L
Shaft Size: 8.0mm x 24mm
Motor Dimensions: 63mm x 66mm
Weight: 650g

http://www.unitedhobbies.com/UNITEDHOBBIES/store/uh_viewItem.asp?idProduct=4653

___________________________________________

  • KD 63-34S Brushless Outrunner:

KA63-34S
Constant: 206Kv
Battery: 10Cell Lipo
Operating Current: 9-32A
Peak Current: 43A
Suggested Prop Size: 19x12

Shaft Size: 8.0mm x 24mm
Motor Dimensions: 63mm x 56mm
Weight: 460g

http://www.unitedhobbies.com/UNITEDHOBBIES/store/uh_viewItem.asp?idProduct=4651

___________________________________________

  • TGY AerodriveXp SK Series 50-65:

Model: SK50-65 270
Kv: 270rpm/v
Turns: 8
Resistance: 38m-Ohm
Idle Current: 0.7

Shaft: 8mm
Weight: 434g
Rated Power: 2100W
ESC: 80A

Cell count: 6-8S
http://www.unitedhobbies.com/UNITEDHOBBIES/store/uh_viewItem.asp?idProduct=7709

Gyroscopic Calculations re Use in Gimbaled Hub:

 Working Papers:

 

DESIGN:

B

MAKE:

 B

BUY:

 B

Items:

DESIGN:

 

Name

Item

Ref

DESIGN: Electro-Simplex - Power-Train - Motor - Cooling

1478

 

 

 

MAKE:

 

Name

Item

 

 

 

 

 

 

BUY:

 

Name

Item

 

BUY: Electric - Motor - Model - Predator 30

1520

 

BUY: Electric - Motor - Model - Predator 37

1584

 

BUY: Electric - Motor - Model - Turnigy C80100-180

1768

 

BUY: Electric - Motor - Model - Hacker A600-6 See above for now.

 

 

BUY: Electric - Motor - Model - Strecher Motoren See above for now.

 

Same Page; Different Craft: ~ Electrotor-SloMo ~ Electrotor-Plus ~ AeroVantage ~ UniCopter ~ UniCopter-UAV ~ UniCopter-1097_Wide_Stagger_Electric.dc ~ Single-Bladed All Electric Rotor

General Information: ~ OTHER: Electrical - Motor

Introduction Page | SynchroLite Home Page | Electrotor Home Page | UniCopter Home Page | Nemesis Home Page | AeroVantage Home Page:

Last Revised: December 21, 2009