Dragonfly_InitialReduction

Dragonfly ~ Power Train - Reduction - Initial

Working Papers:

DESIGN:

MAKE:

B391

Items:

DESIGN:

	Name	Item
	DESIGN: Dragonfly ~ Power Train - Reduction - Initial - Calculations - Preliminary	1204
	DESIGN: Dragonfly ~ Power Train - Reduction - Initial - Gear Selection	1147
	DESIGN: Dragonfly ~ Power Train - Reduction - Initial - Gear Created Loads	1144
	DESIGN: Dragonfly ~ Power Train - Reduction - Initial - Load Distribution	1144
	DESIGN: Dragonfly ~ Power Train - Reduction - Initial - Bearing Selection	1145

MAKE:

	Name	Item
	Dragonfly ~ Power Train - Reduction - Initial - Assembly	1202
	Dragonfly ~ Power Train - Reduction - Initial - Housing	1201
	Dragonfly ~ Power Train - Reduction - Initial - X-tube	1155

BUY:

	Name	Item
	PT - Gear - Bevel - Spiral tooth - Pitch 07, Ratio 1.5:1, 16 / 24 teeth	1165 /1166
	PT - Gear - Bevel - Spiral tooth - Pitch 08, Ratio 2.5:1, 16 / 40 teeth
	PT - Gear - Bevel - Spiral tooth - Pitch 08, Ratio 2:1, 18 / 36 teeth	0923 /0924
	PT - Gear - Bevel - Spiral tooth - Pitch 09, Ratio 2:1, 17 /34 teeth	1291

Potential Problems:

Spiral Bevel Gears Reduction:

Same Page ~ Different Craft:

Related Pages this Site:

Mini 500 Transmission B011 This section should probably be move to a different page.

Back to top | Dragonfly Home Page | UniCopter Home Page | SynchroLite Home Page

Last Revised; May 9, 2004