• Make the table length 4 meters:
• The initial table will be 2 meters.
• Later, it may be extended to 4 meters.
• Even later, it may be extended to 7 or 8 meters; if there is a desire to have twinned blades.
• The supports will be at 1-meter centers.

• The end Unistrut lengths extend out over the outboard flange on the end supports.
• Unistrut in furthest right 'meter' should be removable for turning the rotorhub.
• The Unistrut sections should abut at different supports so as to add rigidity.

Back to top | SynchroLite Home Page | UniCopter Home Page | Nemesis Home Page