OTHER: Electrical - Motor - Radial Flux

• Torquemax ~ The LRK Site
• Lynch Motors L.M.C Ltd Motors

• Consider the idea of using a permanent magnet bearing to maintain an equal airgap around the circumference of a radial motor, such as the ElectrotorSloMo Motor. The intent is to offset any radial shift in the rotor due to the possible that the layers of the elastomer in the torque-pitch bearing between the electric-rotor and the aero-rotor can be changed due to the compression or expansion in the radial direction.

• Axial Load on the Bearing: Another consideration would be to have spaces, in the axial direction, between the bearings in the above sketch. The width of the spacings between the bearing would be such so as to impart an restoring force should the stationary magnet rings shift axially in respect to the rotational magnetic rings.

• xx

Introduction Page | SynchroLite Home Page | Electrotor Home Page | UniCopter Home Page | Nemesis Home Page | AeroVantage Home Page: