1662

Item 1662

DESIGN: ElectrotorPlus ~ MRGA - Gyro - Hub Spring

Notes:

This is for Earlier Ideas Where Connecting Rods Were Used:

The pair of connecting moment rods must have identical motions. This is because the distance between the hubs teetering axis and the gyros teetering axis, plus the length of both connecting Force Rods are all fixed.

This is not so if the connecting rods contain a damper.

The hub spring and the offset teetering rotor methods may work with one connecting force rod, but this is probably not a good idea. Perhaps both Moment Rods could have a small amount of 'spring'.

Calculations:

Last Revised: July 30, 2008