Item 1577

MAKE: Electrotor-Simplex ~ Rotor - Hub (Head) - Assembly - Final

Drawing:

xxx

Bill of Material 1577

Note:

The two bolts [Item 1480] are an alternative to the Teetering Pin [Item 1555], which will have threads on bpth ends. If the Teetering Pin is used then the Trunnion [Item 1601} will not have to be machined and threaded.

Introduction Page | Dragonfly Home Page| Electrotor Home Page | UniCopter Home Page | Nemesis Home Page | SynchroLite Home Page

Last Revised: November 22, 2007