1381

Item 1381

MAKE: SynchroLite ~ Rotor - Hub - 3-blade - CVJ & HS - X-inner

Drawing:

Bill of Material 1381

Notes:

XXX

xxx

Material:

Probably steel since the part is small and has bearing surfaces.

The Gyrobee is 5/8" OD 4130 Steel.

From Tuflite Specification pages, materials that have been used successfully;

52100 high carbon steel
4140 chrome or nickel plated steel
300 and 400 series stainless steel
Monel
Precipitation-hardened grades 17-4PH, 15-5PH, 13-8PH moly chrome and nickel plated stainless steel.
2000 and 7000 series aluminum grades hard anodized
Low to high carbon steels

See; DESIGN: SynchroLite ~ Rotor - Hub - 2-blade Teetering ~ Material

Finish for Inner Race of Bearing:

See Rexnord Tuflite composite bearings with unique journal bearing bores on; OTHER: Mechanical - Bearing ~ Teetering Bearing. Shafting: Information on the shafting; material, hardness, finish, etc. can be found on page B4.

Back to top | SynchroLite Home Page | UniCopter Home Page | Nemesis Home Page

Last Revised: January 19, 2005