Item 0162
OTHER:
Helicopter - Outside - Single (1-seat) - Revolution - Mini-500
Transmission - Spiral Bevel Gear Set:
Re: Safety Factors used in helicopters:
|
FORM: Gear - Bevel (spiral) - Horsepower (Hamilton) |
|
|
|
The Pitch appears to be Module 4. The tooth count is 9 and 45. The face width is slightly over 1". The gear has an overall diameter of 7". The circular pitch is approximately 0.5" on the circumference. Dennis Fetters said that this gear set is used on the 1 and 2 seater. Their literature mentions a 2:1 or a 1.2:1 safety factor (depending on how you read it). |
Revolution lists their engines at 67-80 hp for the 1 seat and 138 hp for the 2 seat. The lines below are therefor their theoretical Service (safety) Factors;
|
|
|
1 seat Talon |
2 seat Voyager |
|
|
Durability SF |
0.61 |
0.33 |
|
|
Strength SF |
0.71 |
0.38 |
Locations of specific Information:
This Web Site:
|
|
DESIGN: SynchroLite ~ Rotor - Hub |
|
|
|
DESIGN: SynchroLite ~ Power Train - Mast |
|
|
|
DESIGN: SynchroLite ~ Fuselage - Body - Canopy |
|
|
|
MAKE: Power Train - Lubrication |
|
|
|
DESIGN: SynchroLite ~ Rotor - Hub - Bearings - Pitch |
|
|
|
DESIGN: SynchroLite ~ Rotor - Disk - Coning Angle |
|
|
|
DESIGN: SynchroLite ~ Rotor - Disk - Undersling |
|
|
|
DESIGN: UniCopter ~ Rotor |
http://www.unicopter.com/HeliSpec/0162Page1.html
Cockpit dimensions of Mini 500.
Use
search engine, located on initial page, to find all locations in this web site.Other Web Sites:
Partial - Mini-500 Owners List
Pictures of problems with Mini-500
Miscellaneous Information:
Blade:
from MDThe Mini 500 blade weighs 16.6 lbs + 1 pound tip weight radius is 9 feet 7 inches, chord is 8 inches
It is made with a solid extruded 6061 T6 aluminum leading edge (up to about the c.l.) and has a foam core on the trailing edge, and is wrapped with fiberglass.
Back to top | SynchroLite Home Page | UniCopter Home Page | Nemesis Home Page
Last Revised: January 14, 2005
